YOKOGAWA PW441-10 Power Supply

YOKOGAWA PW441-10 provides secure access to assets and helps reduce operational costs associated with travel costs and time away from the primary site.The MRD-350 is an industrial mobile broadband router designed for remote access across cellular networks and takes advantage of the low cost of the Internet to efficiently interconnect interconnected systems so that HMS, PLCS, and other devices can communicate with each other. With an uplink capacity of up to 5.7 Mbit/s and a downlink capacity of up to 14.5 Mbit/s, the router is suitable for high data rates. Typical mobile or static applications include video surveillance, SCAD/DNP3 telemetry systems, and remote access to machines and equipment. For solar applications, energy efficiency is critical, and the MRD-350 has a special low-power mode that allows it to be fully powered only when needed. The MRD-350 supports a wide variety of wireless standards, including GSM, GLU, 3G UMTS, HSDPA and HSUEA. dependent on a single carrier.

YOKOGAWA PW441-10 will automatically switch to an alternative Sim card. For shipboard applications (trains, trucks, buses, buggies, etc.). The router will automatically use the most efficient network based on geographic area. A rugged enclosure, operating voltage range from 10VDC to 60VDC, compact design with all interfaces and light-emitting diodes positioned on the front make this unit ideal for industrial railroad applications in harsh environments. The isolation between the psu and the Ethernet and serial ports provides protection against problems caused by ground loops. Internet-connected equipment requires countermeasures against network threats. mrd-350 provides protection against malicious eavesdroppers through encrypted communication tunnels – virtual private networks (vpn). The device also features a simple but powerful packet inspection firewall. Using the network interface on the star, it is easy to create a vpn tunnel between sites, even running on unsecured networks such as the Internet. To extend the life of legacy devices, tools are included that will ensure connectivity with PLCS and other RS-232 based devices. The built-in two-port 10/100 Ethernet switch and RS-232 port allow a wide range of devices, machines and systems to connect seamlessly over any distance.