TEWS TPMC815-11 Technologies Interface Module

In accordance with the safety standards, you need two separate pushbuttons on the TEWS TPMC815-11, the distance for which is also defined in the standards. You also need an enabling signal to be true for the double hand pressure function In order to work, this enabling signal can be a safety signal like an emergency or a safety gate, or it can be a normal signal like the presence of a piece of something to be worked on, or it can be a combination of both.

How to use the TEWS TPMC815-11
If button 1 is pressed and button 2 is activated within the permitted time of the so-called difference time. The number of ships calculated according to the standard _ When the existing enable = 1, the output signal will be set to 1. If the difference in time between the activation of pushbutton 1 and pushbutton 2 is greater than the disc time …… the robot will not start, the pushbuttons have to be released during the disc time in order for the machine to run. As soon as one of the buttons is released or the enable signal is no longer available, the machine will stop running with enable=0. The enable signal Q can only be reset to 1 when the other button has been released, if both buttons are restarted within the difference time of the existing enable=1.

A 10-year warranty for the life of the equipment, as well as engineering services and post-sales support. Emerson’s Deltav for Pöyry System Connectivity Solution was used to seamlessly connect the new Deltav Operator Station to the existing Pöyry controllers and I/O. The Deltav Connectivity Solution is an interface designed to communicate with the labels in the Pöyry Process Control Unit so that operators perform the same tasks from the Deltav Operator Station as they do from the Pöyry Console. The system is installed and started up with no downtime, redundancy is enabled, and no modifications to the Pöyry DCS are required.