SC510 3BSE003832R1 Real-time automation controller

The SC510 3BSE003832R1 is available in two powerful fanless CPU options. The module’s features include: 512 kW of battery-backed SRAM, two RS-232 and two RS-232/422/485 ports with automatic flow control and DB9 connectors, two 10/100/1000-base Ethernet RJ-45 ports, DVI-I support for dual DVI and VGA displays, audio inputs with MICs, connections and interfaces, two USB and one Type I/II PC card, PCI-104 expansion, and SVI-104 expansion. I supports dual DVI and VGA displays, audio inputs with MICs, connections and linkages, two USB and one Type I/II PC Card, PCI-104 expansion, and SATA-AUno-2172 supports Windows xp embedded operating system, providing a pre-configured image and optimised on-board device drivers. Seamlessly integrate your applications into the embedded Windows XX and accelerate your system development with an off-the-shelf platform that provides a rich set of network interfaces to meet the varying needs of your applications.

The SC510 3BSE003832R1 is equipped with a 1.8 Gigabit M processor and is the most powerful device available today. the SC510 3BSE003832R1 is cooled by a passive cooling module and an easily swappable fan box located at the bottom of the enclosure. In addition to the CPU and chipset, the CX10.3 module contains 256 mb of demobilisation records (standard), which can be expanded to 512 mb or 1 GB. Without the use of a hard disk drive, Beckhoff embedded the PC from a compact flash. Compact Flash cards can be used with 64mb, as well as 1-, 2- and 4GB. The basic configuration of the SC510 3BSE003832R1 consists of a removable 64MB compact flash card and two Ethernet RJ45 interfaces. These interfaces connect to an internal switch and provide a simple option to create a line topology without the need for an additional Ethernet switch. All other CX Home components can be connected via PC/104 interfaces that are available on both sides of the device. Bekoff’s TwinCat automation software converts a CX 10.3 system into a powerful PLC and motion control system that can be used with or without visualisation.

The SC510 3BSE003832R1 can also be used for motion interpolation of TwinCat CNC interpolated axes. These interfaces connect to an internal switch and provide a simple option to create a line topology without the need for an additional Ethernet switch. All other CX family components can be connected via PC/104 interfaces available on both sides of the unit. A powerful PLC and motion control system can be used with or without visualisation. the SC510 3BSE003832R1 can also be used for motion interpolation with the TwinCart CNC interpolating axes. These interfaces connect to an internal switch and provide a simple option to create a line topology without the need for an additional Ethernet switch.