PM902F 3BDH001000R0005 ABB Controller Module

PM902F 3BDH001000R0005

Technical parameters:

◆ Transmit and receive in one, half-duplex, data transmitting/receiving conversion is done automatically, just send/receive data to/from the interface, short conversion time;
◆ Transparent data transmission, can transmit longer data frames;
◆ Can be used for point-to-point, point-to-multipoint, multi-point-to-point and other communication combinations;
◆ Automatically filter out the false data generated in the air, good long-term reliability and low failure rate;
◆ Low power consumption and sleep function: power 100mw, receiving current <15mA, transmitting current <100mA;

Add to quote
Categories: ,
Get a quote, please contact me immediately：
Simon Zhang
dcsplcsales@gmail.com
Phone/Whatsapp/Skype/Wechat: +86 133 6590 9307

Description

PM902F 3BDH001000R0005 ABB Controller Module

PM902F 3BDH001000R0005’s 21 utility commands are a combination of relay ladder logic and function blocks, supported by a comprehensive programming environment that is easy to navigate and has a familiar look and feel. In addition, an online help file provides information to help users quickly familiarise themselves with the software. Pre-wired I/O cables are also provided as part of the product click-through cable. These cables can be used in both pre-wired and off-the-shelf wire configurations, helping to eliminate the labour-intensive process of connecting PLCI/O to terminal blocks. The cables are priced at $16.50. Automation sells more than 7,000 featured packaged products through its online Automation Superstore and 2,000-page catalogue. With flexible system architecture and integrated security, the system is designed to meet the needs of today’s surveillance applications. Users simply select the right combination of modules in virtually any arrangement to create a customised solution for each job. Users can build an axis subsystem with up to six units or nodes that are connected in a network via Ethernet cat protocol.

The PM902F 3BDH001000R0005 node can accommodate up to 10 modules, including a processor module, one or two power supplies, and a user-determined combination of I/O modules to suit the application. The shaft node uses an integrated RTAC module as CPU, which means that the shaft is not just an rtu, but a complete substation data concentrator and integration platform. The on-axis power module uses the same field-proven technology as the SELL protective relay and supports the entire node. In critical situations where two input power supplies are available, dual power modules are installed on each node so that the axis can control the required processes in the event of a power supply failure. All I/O points are updated every millisecond, even when the nodes on the axis are distributed using the available fibre-optic Ethernet connection. All markers in the system can be recorded as a system-wide event sequence report. Engineers can combine the axes with SEL icon communication networks when they need to separate nodes over large distances without loss of determinism. The axis has a full ic61131 logic processor, secure communications, advanced data concentration, local and remote I/O, and protocol conversion capabilities between multiple built-in client/server protocols. The stand-alone Information Systems 61131 engine provides a means for engineers to run custom control logic at two different speeds.

Related products