Description

Modbus Master/Slave Enhanced Network Interface Module for ControlLogix

MVI56E-MCM/MCMXT

Specifications

• Backward-compatible with previous MVI56-MCM version
• Single Slot – 1756 ControlLogix® backplane compatible
• 10/100 MB Ethernet port for network configuration and diagnostics with Auto Cable Crossover Detection
• User-definable module data memory mapping of up to 10,000 16-bit registers
• 4-character, scrolling, alphanumeric LED display of status and diagnostic data in plain English
• ProSoft Discovery Service (PDS) software finds the module on the network and assigns a temporary IP address to facilitate module access
• Supports RIUP (Remove and Insert Under Power)

Functional Specifications

The MVI56E-MCM will operate on a Local or Remote rack (For remote rack applications with smaller data packet size please refer to the MVI56E-MCMR product)

• Supports Enron version of Modbus protocol for floating-point data transactions
• PCB includes powerful Modbus network analyzer
• Special functions (command control, event commands, status, and so on) aresupported by message transfer (unscheduled) using the MSG instruction
• Error codes, network error counters, and port status data available in user data  memory

Slave Specifications

The MVI56E-MCM module accepts Modbus function code commands of 1, 2, 3, 4, 5, 6, 8, 15, 16, 17, 22, and 23 from an attached Modbus Master unit. A port configured as a Modbus Slave permits a remote Master to interact with all data contained in the module.This data can be derived from other Modbus Slave devices on the network, through a Master port, or from the ControlLogix processor.

Master Specifications

A port configured as a virtual Modbus Master device on the MVI56E-MCM moduleactively issues Modbus commands to other nodes on the Modbus network. Up to 325 commands are supported on each port. Additionally, the Master ports have an optimized polling characteristic that polls Slaves with communication problems less frequently.The ControlLogix processor ladder logic can issues commands directly from ladder logic or actively select commands from the command list to execute under ladder logic control.

The MVI56E Communication Module allows for Modbus Master and/or Slave connectivity from Rockwell Automation® ControlLogix® processors to Modbus RTU/ASCII devices. Each MVI56E port can be configured as a Master or Slave.

The MVI56E-MCM and MVI56E-MCMXT act as input/output modules on the ControlLogix backplane, making Modbus data appear as I/O data to the processor. Two independently configurable serial ports can operate on the same or different Modbus networks. The MVI56E-MCM is designed for standard process applications and the MVI56E-MCMXT is designed for the Logix-XT™ control platform, allowing it to operate in extreme environments. It can tolerate higher operating temperatures, and has conformal coating to protect it from harsh or caustic conditions.

A conformal coating option is available for this product.

==================================================================================================================================================

Main product ：

ABB: Industrial robot spare parts DSQC series, Bailey INFI 90, IGCT, etc., for example: 5SHY6545L0001 AC10272001R0101 5SXE10-0181,5SHY3545L0009，5SHY3545L0010 3BHB013088R0001 3BHE009681R0101 GVC750BE101, PM866, PM861K01, PM864, PM510V16, PPD512 a10-15000 3BHE040375R1023, PPD113, PP836A, PP865A, PP877, PP881, PP885，etc.,

GE: spare parts such as modules, cards, and drivers. For example: VMIVME-7807, VMIVME-7750, WES532-111, UR6UH, SR469-P5-HI-A20, IS230SRTDH2A, IS220PPDAH1B, IS215UCVEH2A , IC698CPE010，IS200SRTDH2ACB，etc.,

Bently Nevada: 3500/3300/1900 system, Proximitor probe, etc.,for example: 3500/22M,3500/32， 3500/15, 3500/20，3500/42M，1900/27，etc.,

Invensys Foxboro: I/A series of systems, FBM sequence control, ladder logic control, incident recall processing, DAC, input/output signal processing, data communication and processing, such as FCP270 and FCP280，P0904HA，E69F-TI2-S，FBM230/P0926GU，FEM100/P0973CA，etc.,

Invensys Triconex: power module,CPU Module,communication module,Input output module,such as 3008,3009,3721,4351B,3805E,8312,3511,4355X，etc.,

Woodward: SPC position controller, PEAK150 digital controller, such as 8521-0312 UG-10D，9907-149, 9907-162, 9907-164, 9907-167, TG-13 (8516-038), 8440-1713/D，5466-258, 8200-226，etc.,

Westinghouse/Emerson: OVATION system, WDPF system, MAX1000 system spare parts, such as 1C31129G03, 5X00063G01, 5X00063G01，1C31181G01，SE3007, VE3008, etc

Rockwell Allen-Bradley：Logix 1756，1794，2711touch screen such as 2711-B6C20，etc.,

Rockwell ICS TRIPLEX：T8151B,T8311 ,T8403 ,T9431, T8480C，etc.,

Rockwell Reliance：PLC-MODULE，WR-D4007，0-57406-E，Y-3023-2-H00AA，etc.,

Schneider Modicon: Quantum 140 series processor, control card, power module,

such as 140CPU65160, 140CPU67160, 140CPU43412，140CPU67060，140DDI35300，140ACO13000，140CRA93100，140CPU11303，140ACO13000，etc.,

Hima: Security modules, such as F8650E, F8652X, F8627X, F8628X, F3236, F6217,F6214， Z7138, F8651X, F8650X，etc.,

Honeywell: all DCS cards, modules, CPUS, such as: CC-MCAR01, CC-PAIH01, CC-PAIH02, CC-PAIH51, CC-PAIX02, CC-PAON01, CC-PCF901, TC-CCR014, TC-PPD011，CC-PCNT02，etc.,

Motorola: MVME162, MVME167, MVME172, MVME177 series, such as MVME5100, MVME5500-0163, VME172PA-652SE，VME162PA-344SE-2G，etc.,

Xycom: I/O, VME board and processor, for example, XVME-530, XVME-674, XVME-957, XVME-976，etc.,

Kollmorgen：Servo drive and motor，such as S72402-NANANA，S62001-550，S20330-SRS，CB06551/PRD-B040SSIB-63，etc.,

Bosch/Rexroth/Indramat: I/O module, PLC controller, driver module，MSK060C-0600-NN-S1-UP1-NNNN，VT2000-52/R900033828，MHD041B-144-PG1-UN，etc.,

=====================================================================================================================================

MVI71HEART – PROSOFT – COMM MODULE
MVI71-MCM – PROSOFT – MODBUS MODULE FOR PLC5 PLATTFORM
PSW-ACENET-100 – PROSOFT – ACENET-100 MODEM MANAGEMENT SOFTWARE (INCLUDES 5 USERS)
PC56 – PROSOFT – PC MODULE CONTROL-LOGIX
PSW-ACENET-75 – PROSOFT – ACENET-75 MODEM MANAGEMENT SOFTWARE (INCLUDES 2 USERS)
6181P17TPW7 – PROSOFT – DISPLAY
PSW-ACENET-500-SF – PROSOFT – ACENET-500 ANNUAL SUBSCRIPTION FEE
MVI71AFC – PROSOFT – MODULE
MVI156MNETR – PROSOFT – MOD BUS MODULE
PSW-ACENET-50 – PROSOFT – ACENET-50 MODEM MANAGEMENT SOFTWARE (INCLUDES 2 USERS)
PRMVI56-HART – PROSOFT – HART MULTI DROP COMMS MODULE
MVI56-MNETR – PROSOFT – COMMUNICATIONS INTERFACE MODULE TCP/IP
PC56-NT-IDE – PROSOFT – MODULE BACKPLANE NT 4.0
MVIBAS – PROSOFT – MODULE
MVI56-MNETC – PROSOFT – COMMUNICATION MODULE MODBUS
RLXIB-IH2N-W-X – PROSOFT – 802.11N INDUSTRIAL DUAL HOTSPOT WATERTIGHT VERSION, FCC NEW
ILX56MM – PROSOFT – MESSAGE MANAGER MODULE WITH SIEMENS INDUSTRIAL ETHERNET AND MODBUS TCP/IP
1100-MBM – PROSOFT – I/O MODULE MODBUS PROTOCOL INTERFACE
PTQ-PDPMV1 – PROSOFT – PROFIBUS MASTER DPV1 COMMUNICATION MODULE
EZ-ASCE – PROSOFT – EZ DESIGN STUDIO FOR APPSRVCE. SOFTWARE ONLY
PTQ-AFC – PROSOFT – GAS OIL FLOW COMPUTER (AGA-3, 7, 8 API 2540) 16 METER RUNS
3150-MCM – PROSOFT – COMMUNICATION MODULE MODBUS SERIES 2
PSW-ACENET-35 – PROSOFT – ACENET-35 MODEM MANAGEMENT SOFTWARE (INCLUDES 2 USERS)
MVI56EMCMCC – PROSOFT – MODULE
PTQ-HART – PROSOFT – HART MULTI-DROP – 4 CHANNEL COMMUNICATION MODULE
MVI56-MDA4 – PROSOFT – COMMUNICATIONS MODULE
MVI56-MDA16 – PROSOFT – GAS ANALYZERSLAVE MODULE
MVI56-MNETCR – PROSOFT – COMMUNICATION MODULE
MV156-DNPSNET – PROSOFT – ETHERNET SERVER NETWORK INTERFACE MODULE DNP3.0