GE IS220PDIOH1B 336A5026ADP6 Both AC and DC loads can be driven

GE IS220PDIOH1B 336A5026ADP6 is an electronic component that controls the conduction between the collector and emitter through base current. It is a contactless component. GE IS220PDIOH1B 336A5026ADP6 is mainly used for positioning control, which requires the output of crystals to emit pulses. And relays cannot emit pulses, so they cannot be positioned for control. If a relay is used to control the positioning servo or stepper, it is not cost-effective to add a positioning module. And using a transistor output can control servo, etc. That’s it. According to the production process requirements, the start and stop of various indicator lights, frequency converters/digital DC speed controllers should use transistor outputs, which are suitable for high-frequency actions and have a short response time

GE IS220PDIOH1B 336A5026ADP6 output
The advantage of GE IS220PDIOH1B 336A5026ADP6 is that different common points can carry different AC and DC loads, and the voltage can also be different, with a load current of up to 2A/point; However, the relay output method is not suitable for high-frequency operated loads, which is determined by the lifespan of the relay. Its lifespan decreases with the increase of load current, generally between hundreds of thousands to Jl million times, and some company products can reach more than 10 million times with a response time of 10ms.
The biggest advantage of GE IS220PDIOH1B 336A5026ADP6 is that it is suitable for high-frequency operation, with a short response time, generally around 0.2ms. However, it can only carry DC 5-30V loads, with a maximum output load current of 0.5A/point, but not exceeding 0.8A every 4 points.
When the output frequency of GE IS220PDIOH1B 336A5026ADP6 is below 6 times per minute, relay output should be preferred because of its simple circuit design, strong anti-interference and load capacity. When the frequency is below 10 times/min, relay output mode can be used; PLC output can also be used to drive Darlington transistors (5-10A), which can greatly reduce the load.