GE IS200TSVCH2AED MRP246517 Circuit Board Module

GE IS200TSVCH2AED MRP246517 Accurate measurement of digester gas flow produced in wastewater treatment processes is important for process productivity and environmental regulatory reporting. The measurement of gas production is directly proportional to the effectiveness and efficiency of the digester process itself. The amount of gas sent to the engine is then the key control variable if the collected gas is used as a fuel in a cogeneration or CHP system. In addition, if any gas is released or flared, as both methane and carbon dioxide are known to be polluting greenhouse gases (GHGs), local environmental regulations often require that the amount of gas released or flared be reported. Other important factors when selecting a digester gas flow meter include installation safety and ease of maintenance. Since CH 4 is a flammable, potentially explosive gas, the instrument should have an agency approval certificate for Div.1/Zone 1 HazEx installation. If the meter is to be installed before the gas is dry/cleaned or not at all, the engineer must also consider the success of measuring S deposits in wet gas, blockage or fouling of orifices or moving parts due to H 2 , and the cost and convenience of regular cleaning to remove H 2 S residues.

With no moving parts, a simple plug-in design, and full global HazEx certification, the GE IS200TSVCH2AED MRP246517 flowmeter is the ideal solution for gas flow measurement in digesters.The ST80 flowmeter is a high-performance, rugged thermal dispersion technology air/gas flowmeter that combines ultra-reliable, feature-rich electronics with FCI Innovations such as Adaptive Sensing Technology (AST) combined with the industry’s widest selection of application-matched flow rates combined with sensors, including FCI’s Wet Gas Flow Element, provide a truly superior solution for moisture-rich biogas applications. The meter further combines these features with a rugged transmitter housing and the industry’s widest selection of process connections to provide maximum service life and ease of installation in user-installed piping or ducting. The ST80s plug-in configuration for wastewater digester gas is a single-point flowmeter for pipe diameters greater than 2 inches (51 mm). It has a wide operating flow range: 0.25 to 1000 SFPS (0.07 to 305 NMPS).