GE IS200BPVCG1BR1 Data Register

GE IS200BPVCG1BR1 Data Register

IS200BPVCG1BR1 analog signal filtering can be used to program the design method, the field analog signal sampling 3 times continuously, the sampling interval by the A/D conversion speed and the analog signal change rate decision. 3 times the sampling data were stored in the data register DT10, DT11, DT12, when the last sampling is over to use the last 1 time after the end of the data comparison, data exchange instruction, data segment comparison When the last sampling is finished, use the data comparison, data exchange instruction, data segment comparison instruction to remove the maximum and minimum values, and keep the middle value as the sampling result stored in the data register DT0.

IS200BPVCG1BR1 to improve the reliability of read into the PLC field signals can also be used to control the system’s own characteristics, the use of the relationship between the signals to determine the degree of confidence in the signal. Such as liquid level control, because the size of the tank is known, liquid inlet or outlet valve openings and pressure is known, in a certain period of time the height of the liquid change in the tank in what range is known, if the liquid level meter sent to the PLC data and the estimated height of the liquid level is a large difference in judgment may be a failure of the liquid level meter, notify the operator through the fault alarm system to check the liquid level meter