CC-PAIX01 51405038-275 The Lower Unit utilizes sensors

CC-PAIX01 51405038-275 performs frequency conversion speed control on the three-phase asynchronous motor so that the rotational speed of the cutting blade is infinitely adjustable from 0 to 3400 r/min, and the rotational speed of the cutting blade can be set according to the material of the specimen. One stepping motor swings the pendulum arm through worm gear transmission to realize the Z-direction feeding (i.e. vertical feeding) of the cutting blade. The other two stepping motors drive the table in X direction (i.e., left-right direction) and Y direction (i.e., front-back direction) through the screws and nuts respectively. The system is equipped with four cutting modes, including constant speed cutting, in-three-out-one cutting, layer-by-layer cutting and continuous cutting.

CC-PAIX01 51405038-275 system, PLC acts as the lower computer, utilizing sensors to collect information on monitoring motors, inverters and other related objects, and after processing the input information and synthesizing the information obtained by the collector, it feeds back to control the monitoring objects and sends the information to the upper PC; on the other hand, the PLC accepts the control instructions from the PC, and analyzes, judges, and synthesizes the information by analyzing the inputs and operation instructions. On the other hand, PLC accepts the control instruction from PC, and through the analysis, judgment and comprehensive processing of input and operation instruction, it outputs the control signal to realize the control of cutting machine.

CC-PAIX01 51405038-275 The upper computer monitors the PLC and sends control information, and at the same time, the computer is also able to accept the information collected by the PLC, and carry out fault alarms and parameter displays for the monitored objects. The system has the functions of cutting mode selection control, system start, stop, pause control, cutting status display, cutting speed display, accident alarm display and so on.