BAUMULLER BUM61-2030-54-B-O-12 Servo Drive

BAUMULLER BUM61-2030-54-B-O-12 Servo Drive 

BUM61-2030-54-B-O-12 temporarily replace the field input signal with a manual switch to manually check and verify the PLC input terminals one by one. the indicator light of the PLC input terminals is on, indicating normal; on the contrary, you should check the wiring or the I/O point is bad. Module in the output power supply is good, check all PLC output terminal indicator is fully lit. PLC input terminal indicator is lit, said normal. If the PLC input terminals are lit, it means it is normal, otherwise, we should check the wiring or the I/O points are bad.

BUM61-2030-54-B-O-12 system debugging should first connect the power supply, external circuits and input/output terminals according to the control requirements, and then load the program in the PLC and run the PLC for debugging. Connect the PLC with the field equipment. Comprehensively check the entire PLC control system before formal commissioning, including power supply, grounding, device connection lines, I/O wiring and so on. In the case of ensuring that the entire hardware connection is correct, you can send power.