ABB LD800HSE Fieldbus Linking Device

ABB LD800HSE Fieldbus Linking Device

ABB LD800HSE has also been evaluated to ensure that radio frequency emissions do not exceed established marine industry standards, as excessive emissions can affect the performance of a vessel’s electronics. In addition to marine applications, the controller is ideal for applications such as material handling, conveyors and packaging, where Ethernet/IP connectivity allows cost-effective, system-wide data sharing. The Compound L32E controller is a scaled down version of the Compound L35E controller, creating a more economical solution for less complex applications. Providing 750 kilobytes of user storage capacity, the controller supports 16 local I/O modules. Providing end users and OEMs with higher I/O counts, faster high-speed counters and pulse train outputs (PTOs), and improved networking capabilities. This new controller family has up to 38 embedded I/O counters and can support up to 7 additional I/O modules for up to 144 discrete I/O points. Other features include up to six embedded 100 kHz high-speed counters and removable terminal blocks. The MicroLogix x1400 controller can support up to 10,000 programme words and 10,000 data words, as well as memory modules for programme backup and transfer, and data logging or record storage. The controller is equipped with a built-in Celeron M1 Gigahertz processor and 512MB of memory. There are eight independent ABB LD800HSE ports with automatic flow control and three 10/100BRJ-45 ports. Other features include: two USB ports, a Type I/II CF card, WindowsCE 5.00 and Windows XX Embedded off-the-shelf solutions, Windows 2000/XX driver off-the-shelf and Linux driver support, Windows XX Embedded off-the-shelf platform (SP2) with system and I/OLED indicators. Ready to meet a wide range of requirements, the Uno-4678 is available directly from AdTech or from an AdTech authorised reseller.

ABB LD800HSE is available in two powerful fanless CPU options. The module’s features include: 512 kW of battery-backed SRAM, two RS-232 and two RS-232/422/485 ports with automatic flow control and DB9 connectors, two 10/100/1000-base Ethernet RJ-45 ports, DVI-I support for dual DVI and VGA displays, audio inputs with MICs, connections and interfaces, two USB and one Type I/II PC card, PCI-104 expansion, and SVI-104 expansion. I supports dual DVI and VGA displays, audio inputs with MICs, connections and linkages, two USB and one Type I/II PC Card, PCI-104 expansion, and SATA-AUno-2172 supports Windows xp embedded operating system, providing a pre-configured image and optimised on-board device drivers. Seamlessly integrate your applications into the embedded Windows XX and accelerate your system development with an off-the-shelf platform that provides a rich set of network interfaces to meet the varying needs of your applications.These interfaces connect to an internal switch and provide a simple option to create a line topology without the need for an additional Ethernet switch. All other CX Home components can be connected via PC/104 interfaces that are available on both sides of the device. Bekoff’s TwinCat automation software converts a CX 10.3 system into a powerful PLC and motion control system that can be used with or without visualisation.These interfaces connect to an internal switch and provide a simple option to create a line topology without the need for an additional Ethernet switch. All other CX family components can be connected via PC/104 interfaces available on both sides of the unit. A powerful PLC and motion control system can be used with or without visualisation.