146031-01 3500/22M Transient Data Interface Module

146031-01 3500/22M

Adopts high-performance industrial-grade processor

Adopt high-performance industrial-grade wireless module

4G full network communication (Unicom, Telecom, Mobile)

Support low power consumption mode

Add to quote
Categories: ,
Get a quote, please contact me immediately：
Simon Zhang
dcsplcsales@gmail.com
Phone/Whatsapp/Skype/Wechat: +86 133 6590 9307

Description

146031-01 3500/22M Transient Data Interface Module

The identifier and body of the 146031-01 3500/22M depend on the received linkage command from the host computer. The end code indicates the status of the command completion (i.e., whether or not an error has occurred), and it must be divided into frames when the answer exceeds 132 characters. The end code is the information in the answer frame that indicates the answer from the PLC. Example end codes are 00 for normal end, 13 for FCS error, 14 for format error, 15 for entry code data error, 18 for frame length error, A3 for termination due to FCS error while transmitting data, and A8 for termination due to frame length error while transmitting data.

146031-01 3500/22M upper computer and more than one PLC for communication, must be connected to a RS232 / 422 level converter, RS422 using balanced transmission and reception methods, it has a long transmission distance, anti-interference ability and multi-point communication capabilities, can be connected to a maximum of 32 sets of PLCs, as shown in Figure 1, each PLC must be hanged on a COM06 unit for the RS422 Each PLC must hang a COM06 unit for RS422 connection, and the communication between all PLCs and computers adopts the PLC uplink communication protocol.

The setting switch of the RS232 / 422 converter is dialled to the 422 method, and the COM06 communication board unit on the OMRON PLC is similarly set to the 422 method and the four-wire system. The communication baud rate of the upper and lower units is set to 9600, and the data format is set to E, 7, 2.

Related products