Description
9100 Fibre Optic Transmission Dual Optical Interface
9100
9100 Performance Indicators:
Data electrical interface.
* 9-pin Sub_D jack connector, pin definition in accordance with the protocol specification of Profibus DP.
* Support Profibus DP bus standard.
* Communication rates: 9.6kBit/s, 19.2 kBit/s, 45.45kBit/s, 93.75k kBit/s, 187.5kBit/s, 500kBit/s, 1.5MBit/s, 6MBit/s and 12MBit/s. * 4000V protected.
* Equipped with 4000V lightning protection as well as 1.5A overcurrent protection and 600W surge protection;
* Terminating resistor: this machine does not come with terminating resistor, please connect it externally as needed.
9100 supports dual-network redundancy and fibre-optic ring network, as well as point-to-point, star, chain bus, ring network and hybrid network structure. Long distance transmission over 20km fibre optic, breaking through the distance limitation of cable system. Dual power service channel logic independent, support 1~2 optical/electrical interfaces with flexible, according to the actual needs of the project, to achieve 1 road optical interface + 1 road data interface
9100 adopts 155M dual optical interfaces to better support the outstanding advantages of fibre optic transmission Profibus DP bus: peer-to-peer transmission, burst data, bus arbitration, etc., and at the same time to achieve high speed and long distance transmission, electrical and ground isolation, to reduce interference and other properties. The product is industrial grade design, IP30 protection level, wave pattern aluminium reinforced chassis, 35mm rail mounting, DC (9-36) V wide power input, with relay alarm output, dual power redundancy and isolation protection and other advantages.