KUC711AE101 3BHB004661R0101 3BHB004791R0101 is the first to add Vge and to be stable (cutoff bias -15V, conduction bias +15V), and then can be added to the Vce. do not when the G pole overhangs or is not stable on the addition of Vce (a few hundred a thousand volts), because of the coupling capacitance of the Cgc poles between the IGBT can be mistakenly conductive, so that the Too high dv/dt caused by electrical breakdown and damage. In order to avoid the occurrence of the above phenomenon generally use the delay circuit method, so that Vce delay Vge about 0.2 seconds, which greatly improves the use of security, reliability, especially in high-power devices should be noted.

KUC711AE101 3BHB004661R0101 3BHB004791R0101 The simulation of modern electronic systems using power appliances has always been a challenge due to the nonlinear properties of power switches, the connection to continuous subsystems and the design of discrete-time controls [1]. Nowadays, simulation studies are also used in more and more complex systems in order to design effective control countermeasures. Examples include renewable energy conversion systems [2], complete traction systems [3], etc. In these cases, the actual control of an effective simulation is required.

The part of KUC711AE101 3BHB004661R0101 3BHB004791R0101 has been dedicated to circuit-specific libraries based on, e.g., PSCAD (a professional tool for power system simulation), CASPOC (a software for modelling and simulation of power electronics and electrical drives), PSPICE (for designing and simulating analogue and digital circuits), PSIM ( Simulation software design for power electronics, motor control and dynamic system simulation) and other power electronics performance simulation. Other software can efficiently control the development, based on specific system libraries or toolboxes, e.g.:MATLAB/Simulink.The use of such software is valuable for the direct generation of real-time control algorithms, such as obtaining dSPACE controller boards.