EPRO PR6425010-100+CON011 Exchange data through buffer memory

The function of the EPRO PR6425010-100+CON011 instruction is to read 16 bit data from the buffer register (BFM) # 29 and # 30 of the special unit (or module) N0.1 and transfer it to the D0 and D1 registers of the PLC.
1. When the special auxiliary relay is closed, the data in EPRO PR6425010-100+CON011 is used as the number of transmission points.
2. The special auxiliary relay is in the disconnected state. When the command is executed, it automatically enters the interrupt inhibit state, and the input interrupt and timer interrupt cannot be executed. Interrupts that occur during this period can only be executed after the FROM instruction is completed. The FROM instruction can be used in interrupt programs.
3. The special auxiliary relay M8028 is in the closed state. If an interrupt occurs during the execution of the From command, the interrupt program will be executed. The From command cannot be used in the interrupt program.

EPRO PR6425010-100+CON011 converts the analog signal received by the input channel into a digital quantity. This module has four input channels and a maximum resolution of 12 bits.
EPRO PR6425010-100+CON011:
1. The optional analog value range is -10V to 10VDC (resolution: 5mV), or 4 to 20mA, -20mA to 20mA (resolution: 20 μ A) .
2. EPRO PR6425010-100+CON011 main units exchange data through buffer memory. FX2N-4AD has a total of 32 buffer memory (each containing 16 bit data).
3. 8 points of EPRO PR6425010-100+CON011 expansion bus. These 8 points can be assigned as inputs or outputs. FX2N-4AD consumes a current of 30mA from the 5V power slot of the FX2N main unit or active expansion unit.