E3ED Control Redundancy Card

The E3ED is used in a variety of process control applications, including wellhead optimization, two- and three-phase separator measurements, and flow and pressure regulation stations. The system includes a compact, rugged multivariable transducer that provides up to 50 percent greater accuracy than competing RTUS, with differential pressure and static measurements of +0.05 percent and +0.28°C, respectively. Unlike other devices that support only one run, the 4203 can be coupled with a second multivariable transmitter to act as a dual-run gas flow computer.” The SCADASSAS 4203 offers an exceptional value in a packaged electronic flow measurement solution,” said Dale Symington, senior vice president of engineering, Control Microsystems. The internal PLC means more power and scalability are available for user applications. Streaming runs can be updated twice per second. And a powerful set of algorithms means the system can handle everything from simple chart recorder replacements to complex production optimization and control.” And a powerful set of algorithms means the system can handle everything from simple chart recorder replacements to complex production optimization and control.” And a powerful set of algorithms means the system can handle anything from simple chart recorder replacements to complex production optimization and control. Includes a 32-bit SCSATAKACPLC, which greatly improves computational performance. A 95% reduction in calculation intervals in a single flow run of Aga-8 means improved accuracy. In addition, the flow run can be updated twice per second for greater control. The reduced power mode reduces power consumption by 50% while still updating the flow twice per second. 4203 includes two discrete inputs for horizontal, pulse or turbine meter inputs. Selectable analog outputs can be used to control drives and motors. Up to two analog inputs can be used to measure tubing and casing pressure. Two RS-232/485 serial ports support an additional SCADASAS system transmitter, remote I/O, radio, local display or other serial device.

When connected to additional chips, the 4203 can utilize expanded I/O capabilities.The SCADASSAS 4203 uses MODBUS Master/Slave and MODBUSEFM protocols as its native protocol. Customized protocols can be easily implemented using the system’s C++ programming tools. Compact, ruggedized device that provides a local display of the controller’s process variables and allows the operator to enter any control parameter. Designed for more demanding applications, new features of the Scarsac Vision 60 include extended screen configuration memory, improved alarm management capabilities and two multi-purpose serial ports. Built for demanding applications Each Skadak Vision operator interface is easy to install, user-friendly, and built to withstand conditions in remote locations and extreme environments. With extended screen configurations up to 120K of memory, the Scapac Vision 60 is best suited for more challenging applications that require a large number of display screens and data display capabilities, such as complex recipes and alarm sequences. The Scapac Vision 60 offers a 4-line LCD display consisting of 20 characters, including 20 programmable function keys and 8 programmable LED indicators. The new unit supports up to 256 alarms. The backlit display ensures easy reading in low light conditions. User-friendly menu interface prompts changes to data or preset functions. Microsoft’s Windows-based software application provides all the necessary tools to quickly configure the unit. With two multi-functional serial ports, the Scantec Vision 60 is able to communicate synchronously with two independent Scantec RTUS. These HMI devices communicate using the MODBUS protocol and are therefore also These HMI devices communicate using the MODBUS protocol and are therefore also compatible with the entire MODBUSPLCS.