ABB PFEA112-20 Detection sensor

ABB PFEA112-20 meets the increasing demand of users for tightly integrated PLCs and action controllers. In addition to precise single axis positioning, the technology CPU is particularly suitable for complex synchronous motion applications. Users can also combine standard EC-61131 PLC programming with openable compatible motion control functions into a high-performance unit and fully integrate it into Siemens’ fully integrated automation architecture. The CPUs of these technologies are designed for machines that require high PLC performance and motion control functions, for the following applications: filling and packaging; Processing and assembly; Flying shear; Carton assembly and labeling machine; Wait a minute. Integrating automation and motion control into a single SIMATIC CPU saves a lot of costs in engineering and operation: loading and packaging; Processing and assembly; Flying shear; Carton assembly and labeling machine; Wait a minute. Integrating automation and motion control into a SIMATIC CPU saves significant costs in engineering and operation

ABB PFEA112-20 provides unparalleled reliability. Inspector 101E provides all the simplicity and power of the original inspector 101, coupled with its direct acceptance of encoder signals, eliminating the need for tracking and rejecting components in variable speed production lines. “The easy-to-use Inspector 101 sensor fundamentally changes the way sensor users detect parts or components, eliminating the complex wiring, installation, ladder logic programming, and precise part handling required for using multiple photoelectric sensors,” said Brian Phillips, Vice President of Cognex and Expert Sensor. By directly receiving encoder signals, the 101E inspector eliminates the cost and complexity of PLC tracking and rejecting parts on variable speed lines. Unlike the shift register of PLCs that require programming, the inspector’s shift register is automatic, allowing it to accurately track up to 4000 components between inspection and rejection points. By acquiring and processing over 500 images per second, the inspector can detect and inspect components on the fastest production line. If no inspection is required, the inspector can be used to detect and track parts or nets to improve process control. The gradual setup of the inspector makes it easy for anyone on the factory floor to deploy it. Inspector 101E can now be used. The inspector 101E eliminates the cost and complexity of partial tracking and rejection in the variable speed line of PLCs. Unlike the shift register of PLC that requires programming, the shift register of the inspector is automatic, allowing it to accurately track up to 4000 components between inspection and rejection points.