GE IS230STAIH2A Mark VIe Board

Output channel: 32

Output connection method: direct plug-in contact wiring

Output type: transistor, low-end output

Power supply voltage: 24V DC (-15%~+20%)

Output voltage level: 12V~24V (-15%~+20%)

Internal 5V power consumption: 170mA (typical value)

Maximum leakage current when OFF: below 0.5mA

Add to quote

Category: General Electric
Get a quote, please contact me immediately：

Simon Zhang
dcsplcsales@gmail.com
Phone/Whatsapp/Skype/Wechat: +86 133 6590 9307

Description

GE IS230STAIH2A Mark VIe Board

Part Number: IS230STAIH2A
2 safety contacts, STOP 0; 1 Safety contact, STOP 1
1 signal output
Suitable for output signal processing of contact sensors
Suitable for connecting to active signal outputs (AOPDs), such as safety gratings/light curtains
Shell material: Fiberglass reinforced thermoplastic with ventilation
Gross weight: 280 g
Mechanical lifespan: 10000000 operations
Installation: DIN rail quick installation according to EN 60715
Terminal connectors: hard or soft wires
Screw terminal M20 x 1.5
Cable cross-section: 0.25 mm ²
Cable cross-section: 2.5 mm ²
Tightening torque of clamp: 0.6 Nm
Width: 22.5 mm
Height: 100 mm
Depth: 121 mm
Shell protection level: IP40
Gap protection level: IP54
Protection level of clamps and terminals: IP20
Ambient temperature: -25+ 60 ℃
Storage and transportation temperature: -40 ℃
Storage and transportation temperature:+85 ℃ MAX
Vibration resistance according to EN 60068-2-6:10 55 Hz, amplitude 0.35 mm, ± 15%
Impact resistance: 30 g/11 ms
Rated impulse withstand voltage: 4 kV
Conducted resistance: 40 Ω