1756-ENBTA ControlLogix EtherNet

Allen-Bradley 1756-enbt Controller – Ethernet/IP 10/100 Bridge Module – Twisted Pair, supports up to 64 TP/IP connections and 128 Logix connections (I/O and information), 64+64 CIP unconnected Ethernet messages (backward +); Maximum multicast tokens: 32; RSLOGX5000 Software Version 16.03 or later unicast; socket service; SRMP support password (required)), duplicate IP detection (from revision 3.3); packet rate capacity

Specifications: Communication rate: 10/100Mbps; Connections: Each module supports up to 64 TP/IP connections and 128 Logix connections (I/O and Messages); 电流拉平@5.1V直流:700mA; Current draw @ 24V DC: 3mA; Power dissipation: 3.65W; Ports: 1 Ethernet RJ45 Category 5; Ethernet cable. 802.3 compliant shielded or unshielded twisted pair; Isolation Voltage: 30V (continuous), basic insulation type tested at 707V DC temperature for 60 seconds.

Miscellaneous: The 1756enbt is an enhanced version of the 1756-eNET module, which can be used either as an interface for controllers to communicate with other devices over an Ethernet/IP network or as an adapter for the 1756 I/O modules on an Ethernet/IP network. 1756enbt modules communicate at faster speeds (10/100Mbps full duplex ratio. 10mbps half duplex), including higher speeds (10/100Mbps full duplex ratio. 10mbps half duplex), including higher speeds (10/100Mbps full duplex ratio. 10mbps half duplex), including faster speeds (10/100Mbps full duplex ratio. 10mbps half duplex). ), include more on-board memory, and are backward compatible replacements for 1756enet modules without modifying current programs. Discontinued as of 12/31/2021.