ASSEMBLY 0100-71267 Fiber optic interface

-12VDC, PNP and NPN logic (using external power supply)
-24VDC, PNP and NPN logic (using external power supply)
-Input impedance: 1.5k Ω
-Response time: ≤ 9ms
Two programmable relay outputs:
-Breaking voltage: 12~250 V AC/30 V DC
-Continuous current: 10 mA~2 A
Serial communication capability: 8

Add to quote

Category: in stock
Get a quote, please contact me immediately：

Simon Zhang
dcsplcsales@gmail.com
Phone/Whatsapp/Skype/Wechat: +86 133 6590 9307

Description

ASSEMBLY 0100-71267 Fiber optic interface

Performance indicators:
Data electrical interface:
*9-pin Sub_ The D-socket connector and pin definition comply with the protocol specifications of Profibus DP
*Supports the Profibus DP bus standard
*Communication speed: 9.6 kBit/s, 19.2 kBit/s, 45.45 kBit/s, 93.75 kBit/s, 187.5 kBit/s, 500 kBit/s, 1.5 MBit/s, 6 MBit/s, and 12 MBit/s
*Rate setting: automatic recognition or dial switch setting
*Signal delay (electrical port): ≤ 11Bit
*Equipped with 4000V lightning protection, 1.5A overcurrent protection, and 600W surge protection functions;
*Terminal resistance: This device does not come with a terminal resistance, please connect it externally as needed
Fiber optic interface:
*Fiber wavelength: multimode 850nm, 1310 nm; Single mode 1310 nm, 1550 nm.
*Transmission fiber: multimode 50/125 um, 62.5/125 um, 100/140 um; Single mode 8.3/125um, 9/125um, 10/125um.
*Transmission distance: Multi mode 2Km, single mode 20Km, optional for further distances.
*Fiber optic interface types: SC, FC, ST optional, standard SC optical interface.
*Optical path error rate:<10-9
*Signal delay (optical port): ≤ 2.3us/node